WHARFEDALE PM600 POWERED MIXER
The PM600 powered mixer systems have been designed to deliver optimum sound in a variety of applications - from live music performance and playback, to sound reinforcement or public address. Not only that, but they are road tough and simple to transport and set up. The PM600 system incorporates of the following items: * A PM600 powered mixer * Two PT12 two-way 12" loudspeakers * A DM1.0 mic (with cabling) An integral part of the system is the PT10 loudspeakers. These are high-output, high efficiency loudspeakers, featuring Wharfedale Pro proprietary 10" drive units and a purpose-built high quality Electro-Dynamic HF driver (with overload protection). Also facilitating life on the road, the PM mixer section is protected by a tough carpet-covered surround. The PM600 mixer features six mono input channels, with separate Mic and Line input. Other features include Tape In; Digital Delay; Record Out; EFX Send/Return; Power On/Off on front; Parallel speaker outputs (and main line output) on rear; Built-in 230W amp; Three-band EQ i; Thermal protection; XLR plus 1/4in input socket. The DM1.0 microphone displays a tight cardioid pattern to minimise feedback problems and effectively reject signals not originating directly in front of the mic capsule. The mic also features an extended frequency range response for optimum reproduction and clear sound, while special shock-mounting allows movement of the mic element to greatly reduce handling noise.
Our Price: $299.00
JBL JRX 115 15" LOUNDSPEAKER
JBL JRX115 - This trapezoidal, 15” speaker system is at home in live sound,dance music, and speech reinforcement. It’s equipped with low and high-frequency drivers built in our Northridge, California factory. Features include the Dual-Angle, 35mm pole mount socket as well as Nuetrik® SpeakOn® and 1/4” input connectors. An installation version (JRX115i) is also available. Three M10 eyebolts and threaded brackets replace the feet, pole socket, and handles of the portable JRX115.
Our Price: $329.00
MACKIE THUMP (TH-15A) 15 INCH POWERED SPEAKER
Designed by the same team that produced Mackie's best-selling compact active loudspeakers, the Mackie Thump TH-15A Active Loudspeaker provides amazingly accurate response from 20kHz all the way down to 40Hz, giving it just the right amount of punch. All-new Class D circuitry drives its custom, high-precision 15-inch woofer to greater volumes with less heat than is possible with competing designs. Onboard electronics include full system protection packed into a durable polypropylene enclosure, making TH-15A the most lightweight powerhouse in its class. Exceptional Sonic Performance TH-15A Active loudspeakers put out a tremendous amount of sound for their size and price tag. The two-way bass reflex (ported) design generates ample quantities of chest-pounding bass, and its 1" compression driver ensures smooth, wide dispersion. We even inserted a 3-band equalizer at the input to give you all the tonal control you could ever want, with an available 15dB boost or cut at 80Hz (for the Lows), 100Hz to 8kHz (sweepable Mids) and 12kHz (for the Highs). With the TH-15A's extremely versatile EQ, you can add some extra thump to that kick drum, bring out the sizzle in your hi-hats and add pop to vocals. More Than Just a Powered Speaker Cabinet Sure, the TH-15A has a built-in power amp—it has two of them, 298-Watts for the 15" woofer and 99-Watts for the HF horn. New Class D circuitry drives the woofer more efficiently with less heat byproduct than the competition's speakers. But so much more goes into an Active loudspeaker design than just amplifiers. The Active crossover divides the frequencies, time aligns the signals for proper reproduction and sends them to the appropriate drivers; active compression provides protection for the drivers, and thermal circuitry protects the amplifiers. All the onboard electronic systems work together dynamically to produce superior quality sound previously unavailable in this price range.
Our Price: $349.99
JBL EON305 PASSIVE 15" SPEAKER
Features: - 250 watt Passive Speaker System, with a 500 watt program power and 1000 watt peak power rating - Light Weight, at only 15 kg (33 lbs) it is truly portable - Multiple handles for easy transport - JBL 15" low-frequency driver with a 64mm (2 ½ in) diameter edge wound ribbon voice coil - 1" throat diameter next generation JBL neodymium compression driver. - 100° H x 60° V asymmetrical waveguide for uniform audience coverage - SonicGuard™ HF protection - NL4 and ¼" input connectors - Loop thru signal flow for extended system application and easy “daisy-chain” connections - Integrated M10 suspension points for easy rigging - Multi angle enclosure for main or monitor applications - Integrated 36 mm pole mount socket with stabilizing securing screw - Highly designed composite enclosure for durability, lightweight, and acoustic performance. *** The EON305 is a 15-inch, two-way, passive, portable speaker system. It is a light weight loudspeaker system capable of fullbandwidth reproduction at high levels. The EON315 is comprised of a 380 mm (15 in) JBL woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. The system will handle 250 watts continuously and 1000 watts peak. The advanced network
Our Price: $379.00
YAMAHA - EMX212S POWERED MIXER 12-input stereo powered mixer with SPX effects DSP, 2 x 200W @ 4 Ohm
Experienced musicians, performers, speakers, and club operators know the importance of a high-quality sound system with the right features and performance to deliver their sound. Where portability and convenience are important criteria, a system based on a high-performance Yamaha EMXseries powered mixer is definitely the way to go. In one integrated, portable unit you have a mixer to combine and balance your microphone, instrument, and line sources, effects to refine and polish your sound, and power to drive the main speakers and even monitor speakers as well. But that's nowhere near the whole story - Yamaha EMX-series Powered Mixers offer a range of features that let you mix, process, and deliver your sound with maximum quality and creative control ... and, of course, that unrivalled Yamaha sound. - The lowest-powered model in the series offers a pair of 200-watt amplifiers per channel that should be more than sufficient for small-to-medium size venues.
Our Price: $419.99
WHARFEDALE 250W PORTABLE SOUND SYSTEM
The PM600 system incorporates the PM600 powered mixer, two PT12 two-way 12in loudspeakers and a DM1.0 mic (with cabling). - An integral part of the system are the PT loudspeakers. These are high-output, high efficiency loudspeakers, featuring Wharfedale Pro proprietary drive units and a purpose-built high quality Electro-Dynamic HF driver (with overload protection). Also facilitating life on the road, the PM mixer section is protected by a tough carpet-covered surround. The PM600 mixers respectively feature five and six mono input channels, with separate Mic and Line input. Other features include Tape In; Digital Delay; Record Out; EFX Send/Return (on PM600); Power On/Off on front; Parallel speaker outputs (and main line output) on rear; Built-in 230W amp (on PM600); Two-band EQ (three-band EQ in PM600); Thermal protection; XLR plus 1/4in input socket. The DM1.0 microphone displays a tight cardioid pattern to minimise feedback problems and effectively reject signals not originating directly in front of the mic capsule. The mic also features an extended frequency range response for optimum reproduction and clear sound, while special shock-mounting allows movement of the mic element to greatly reduce handling noise.
Our Price: $489.00
JRX 18" PASSIVE SUBWOOFER JRX118S
Features : * 18 in. compact subwoofer. * 350 W (continuous), 1400 W (peak) power capacity. * The rugged enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for durability and improved low-frequency performance. The enclosure is covered in black carpet. * A top mounted, cast aluminum 35 mm pole mount receptacle can receive an optional SS3BK pole to facilitate use of the JRX118SP as a base for a midhigh speaker cabinet. * Non-resonant, all steel handles are used. * Attractive 18-gauge perforated steel grille protects components from damage. * 35 mm pole mount receptacle for use with satellite speakers.
Our Price: $499.00
JBL EON315 POWERED 15" SPEAKER
The EON315 is a 15-inch, two-way, powered, portable speaker system. It is a complete self contained sound reinforcement system, capable of full-bandwidth reproduction at high levels with the added benefit of a microphone pre-amp enabling the direct connection of a dynamic microphone. The EON315 is comprised of a 380 mm (15 in) JBL woofer, a 25.4 mm (1 in) neodymium high frequency compression driver coupled to a 100° H by 60° V waveguide. Both components are driven by the discrete channels of a 280 watt Class-D integrated power amplifier. The input section contains all cross-over functions, protection, and system EQ functionality.****Features : * 280 watt Powered Speaker System * Light Weight. True portability weighing only 15.9 kg (35 lb) * Multiple handles for easy transport * 15" JBL low-frequency driver * 1" throat diameter next generation JBL neodymium compression driver * Efficient Class-D digital amplifier technology * 100° H x 60° V asymmetrical wave guide for uniform audience coverage * Line level and direct microphone input capability * Selectable Pre-engineered EQ settings * Loop thru signal flow for extended system application and easy “daisy-chain” connections * Integrated M10 suspension points for easy rigging * Multi angle enclosure for main or monitor applications * Integrated 36 mm pole mount socket with stabilizing securing screw * Highly designed composite enclosures for durability, lightweight, and acoustic performance
Our Price: $499.00
PEAVEY XR8300 POWERED BOX MIXER
They feature new improved low noise mic preamps, multi point clip sampling and a new subsonic filter to prevent low frequency power robbing. New graphic equalizers have multi-Q bandwidth to allow some filters to perform feedback control while others perform tone control and have Peavey's patented FLS (Feedback Locating System). # 2x300 watts per channel at 4 ohms # 8 improved, low-noise mic preamps # 10 line inputs # 48V phantom power # 3-band EQ, monitor send and effects send on each channel # 25 dB pad on channels 1-6 # Signal and Clip indicator on each channel # Dual Main or Main/Mon power amp mode switch # Dedicated 7-band graphic for mains and monitors with FLS® # DDT™ speaker protection # DSP based effects with parameter control # Channel mute switch # Rugged plastic case
